12V Water Pump with 2.4bar Pressure Switch (3.8L/min, 12V DC)

HOW TO USE

• When using 10mm pipe, it is recommended to secure the inlet and outlet connections with small clamps or cable ties
• Before starting the pump, the outlet line must be open to prevent airlock
• The pressure switch will automatically shut off the pump when the outlet line is closed and the pressure has risen to 2.4bar
• The pressure switch will restart the pump when the outlet pressure drops
• The pump is designed to work with a 12V battery and/or a solar panel connected through a 12V solar charge controller.

• Includes automatic pressure switch set at 2.4bar (35PSI)
• Draws 3.0A only, making it suitable for small 12V batteries
• Sealed switches & electro-coating to prevent corrosion
  
• Soft rubber mounting tabs to reduce vibrations
• Self-priming pump: it can be installed at the top of your water storage tank
• Suitable for various applications: portable gas geysers, freshwater circulation in camper, solar water systems, drip irrigation, fish tanks, hydroponics & more

• Type: Self-priming water pump with 2-chamber diaphragm
• Working voltage: 12V DC
• Maximum flow: 3.8L/min
• Rated current: 3.0A
• Pressure switch: 2.4bar (35PSI)
• Inlet & outlet diameter: 9.5mm (3/8") hose barb, suitable for 10mm pipe
• Max. liquid temperature: 60°C
• Self-priming vertical suction lift: Up to 1.2m
• Run dry: Not recommended
• Motor: Permanent magnet, intermittent
• Duty protection: Thermal overload, automatic restart