Menu
Your Cart

Woodland 8″ PTO Wood Chipper

Woodland 8″ PTO Wood Chipper
Woodland 8″ PTO Wood Chipper
  • Availability: In Stock
  • Brand: Turfmaster
  • Weight: 525.00kg
  • Dimensions: 125.00cm x 114.00cm x 160.00cm
  • Product Code: NUK-WC88
  • Sold by: Turfmaster
Recommended Price
R 115,317.00
Ex Vat: R 100,275.65

Available Options

Woodland Mills WC88 8″ PTO Wood Chipper tractor powered PTO Driven

Due to the popularity of this product, please take note that there are a waiting period of ± 1 week.

The Woodland Mills WC88 8″ (20cm) PTO drive wood chipper was designed for tractors with 35 to 100+ HP. This heavy-duty wood chipper contains an auto hydraulic infeed system and 8″ x 8″ (20 cm x 20 cm) opening making it easy to feed branches of all shapes and sizes. The discharge chute was designed to rotate 360 degrees, making it easy to direct wood chips in any direction. By adjusting the rotating deflector at the end of the chute, you can choose to discharge chips for maximum distance or deflect them directly down to the ground or into a trailer.

Capacity

The WC88 operates on tractors with 30-100 HP. It utilizes a large 23” x 27” (59 cm x 69 cm) infeed hopper opening that tapers down to an 8” x 8” (20 cm x 20 cm) opening where the 8.25” (21cm) diameter hydraulically driven infeed roller grabs the branches and feeds them through the chipper. Branches as small as ¼” (6mm) diameter and as large as 8” (20cm) diameter can be fed through the WC88. To chip full 8” (20cm) diameter logs, tractors with over 60 HP are required.

Hydraulic Infeed System

Branches are pulled into the WC88 via the large 8.25” (21cm) diameter infeed roller. The roller is hydraulically driven via the chippers self contained hydraulic system. The roller is adjustable in direction and speed making it easy to feed branches of all shapes and sizes. The hydraulic pump is direct drive from the lower shaft, meaning there is no need to worry about wearing or loose drive belts. The roller down pressure may be adjusted via the two large springs ensuring it grabs branches and easily pulls them in, eliminating the need for manual feeding.

Flywheel

The dynamically balanced 24” (61cm) diameter, 1” (25mm) thick solid steel flywheel runs on a 2” (50mm) diameter shaft and is supported by 2 industrial and greaseable flanged bearings. It features four CNC machined pockets to hold the reversible blades. The flywheel features four large fan blade paddles that spin at over 1,100 RPM ensuring maximum airflow.

Drive Belt System

The drive belt system is encased by a ¼” (6mm) thick steel guard which can quickly be rotated forward to access the drive system. Simply pull the pin at the top and the guard folds forward, providing quick and complete access to the entire drive system. The PTO shaft (included with chipper) connects from your tractor to the chippers lower 2” (50mm) shaft. Four heavy duty cogged BX series drive belts run up to the flywheel main shaft. These belts are standard off the shelf replacement parts. They are automatically kept in proper tension via the self tensioning system. This system dramatically increases belt life, reduces belt slippage and saves the user from manually adjusting for belt tension. Changing belts are also made easy as the tensioning system can easily be pulled back out of the way allowing the belts to be changed out quickly.

Chipper Blades

The WC88 chipper utilizes four high quality hardened steel reversible chipper blades. These blades are 90 degrees apart and are offset from one another. They can be flipped to take advantage of having two cutting edges on one blade. Each blade is held onto the flywheel with two countersunk M10 bolts and locking nuts. Changing blades can be made very quickly thanks to the clamshell flywheel housing design. Simply undo one bolt and the upper flywheel housing rotates open, providing full access to the flywheel and chipper blades.

Folding Infeed Chute

The infeed chute on the WC88 wood chipper has a large 23” x 27” (59 cm x 69 cm) opening, making it easy to feed branches with multiple limbs effortlessly. The infeed chute can also be folded up which decreases the footprint of the chipper during storage or transport.

Infeed Opening

The opening in the flywheel housing is a large 8” x 8” (20cm x 20cm) square making it quite easy to accept branches with several limbs. This reduces the need to trim your branches down before feeding them into the chipper.

Adjustable Chipper Base

The WC88 chipper has a heavy duty chipper base made of 1/2″ (12mm) thick laser cut steel plates. This base can be adjusted so that the PTO shaft sits at 15-5/8″ to 21-5/8″ (40 cm to 55 cm) off the ground to suit various tractor sizes. Simply hook the chipper up to your tractor and lift it up so it is suspended in the air. The four bolts that hold the base to the chipper housing can be removed and the base can be raised or lowered to suit your tractor configuration.

Discharge Chute

The discharge chute was designed to rotate 360 degrees by simply rotating it with the two handles to the desired angle. This makes it possible to direct the wood chips in any direction regardless of the location of the chipper. The end of the chute stands at 73” (1.9m) off of the ground, making it quite easy to direct the wood chips into the back of a truck or trailer if desired. Located at the end of the discharge chute is a rotating deflector, which allows further control of the location of the wood chips. Simply point it straight for maximum distance or angled down to deflect the chips directly down to the ground or into a trailer.

Warranty

The WC88 is covered by a full 3 year warranty against any manufacturing defects. If a part breaks, we simply ship you a new one from our fully stocked warehouse.  Wearing parts such as belts, bearings and blades are not covered under our warranty.

Specifications:

  • Drive System:  PTO
  • Minimum HP Required (at PTO): 35 hp
  • In-Feed System: Hydraulic
  • Hydraulic Oil: ISO 32 (ISO 46 for warmer climates)
  • Hydraulic Tank Volume: 19 L
  • Hydraulic Requirement: None. Self contained.
  • PTO Shear Bolt: M8 X 45 mm Hex Bolt – Class 8.8 (Grade 5)
  • Blade Quantity and Dimensions: Four (4); 113 X 69 X 8 mm
  • Blade Hardware: M10 X 40 mm Flat Head, M10 Lock Nuts – Class 10.9
  • Infeed Roller Diameter: 195 mm at Tooth Tip
  •  Infeed Chute Dimensions (H X W): 700 mm x 652 mm
  • Product Weight: 525 kg

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Tags: Wood chipper

Related Products

/* */