Liquid Rubber

Spread Rate: Spread rates are based on the product being applied to sound smooth prepared surfaces. This product will cover approximately 1.5 - 2 litre / m² depending on the type of substrate and surface porosity.

• Extremely tough and flexible
• Good resistance to abrasion, impact, and stone chipping
• Ideal for less accessible locations, sharp & intricate contours
• Non-toxic
• Environmentally friendly
• Mould & fungus resistant
• High UV resistance
• High solar reflectance on grey
• Increases productivity
• High strength and elasticity
• Lead content, less than 90 ppm
• Ready for use

Application: Primer coat:

Rubber Duck Nudek Primer & Sealer or Promac Bonding Liquid to the prepared surface. Ensure to apply a uniform wet film thickness 8-10m²/l per coat. Allow drying for 1-1:30 hours @ 23°C, then apply the first coat while tacky.

First coat and waterproofing coats: Apply two or more coats of Promac Rubber Duck Liquid Rubber to the prepared surface at a spreading rate of 1.5 - 2 litre / m² (to achieve best waterproofing coat). Allowing 4 hours drying time @ 23°C between coats. For best results, apply a uniform wet film thickness by spray or trowel to maximise water proofing properties.

Precautions - Roof Slopes:
Make sure that the slopes are such that they prevent water from ponding (Minimum slope of 2 - 4°). Make sure that the slopes are even along the roof.