Nudek Primer & Sealer (Clear)

Spreading Rate: Approximately 8 - 14 m² / litre per coat depending on surface porosity, profile and application method.

Smooth surfaces: Approximately 10 - 14 m²

Rough or porous surfaces: Approximately 8 - 12 m²

• May be applied to damp surfaces (60 % moisture maximum)
• Forms a water-resistant primer coat
• Extremely tough
• Flexible coating
• Resists extreme temperatures
• Compatible with many different coating types
• Applicable to less accessible locations, moulds to sharp & intricate contours
• Lead content, less than 90 ppm

Application:

Decant the required quantity into a suitable container.

Ensure the original container is tightly sealed.

Do not pour back unused product into the original container, as this will contaminate the product.

Apply this product with a quality brush, roller or airless spray equipment to both smooth and rough surfaces in a well ventilated area. Apply one undiluted coat to prepared smooth surfaces and two undiluted coats to prepared rough surfaces.Refer to the SPREADING RATE heading for more information.

Allow drying for 1-1:30 hours @ 23°C between coats or overcoating.

NOTE: All additional products advised for use during surface preparation must be used and applied in accordance with manufacturer's instructions.