Damp Guard

Spreading Rate: Smooth surface: 5.5 – 9 m² / litre per coat: WFT (wet film thickness): 115 ‐ 180 µm, DFT (dry film thickness): 50 ‐ 80 µm, depending on surface porosity, profile and application tools.

• Quick drying
• Excellent adhesion to damp and dry surfaces
• Prevents the effect of penetrating and rising damp
• Forms a dense impenetrable layer to prime and seal damp
• Protects paint from peeling caused by damp
• Low odour
• Easy to use
• Easy clean up with water

Application: Apply this product with a quality brush, roller or airless spray equipment. Apply a minimum of two coats or three to highly porous surfaces. It is important to thin the first coat with 10% water, work well into the surface to achieve a WFT (wet film thickness) of 115-180 μm per coat. Allow a minimum of 6 hours between coats and a maximum 24 hours @ 23°C before overcoating with a Promac decorative finishing coat.